HP HP0-Y39 study guide

IT-Tests.com not only have a high reliability, but also provide a good service. If you choose IT-Tests, but don't pass the exam, we will 100% refund full of your cost to you. IT-Tests.com also provide you with a free update service for one year.

There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents. Now IT certification exam is one of the methods to inspect the employees' ability, but it is not so easy to is one of the way to IT certification exams. Generally, people who participate in the IT certification exam should choose a specific training course, and so choosing a good training course is the guarantee of success. IT-Tests's training course has a high quality, which its practice questions have 95% similarity with real examination. If you use IT-Tests's product to do some simulation test, you can 100% pass your first time to attend IT certification exam.

As we all know, in the era of the popularity of the Internet, looking for information is a very simple thing. But a lot of information are lack of quality and applicability. Many people find HP HP0-Y39 exam training materials in the network. But they do not know which to believe. Here, I have to recommend IT-Tests.com's HP HP0-Y39 exam training materials. The purchase rate and favorable reception of this material is highest on the internet. IT-Tests.com's HP HP0-Y39 exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave. So that you can know the IT-Tests.com's exam material is real and effective.

Now IT industry is more and more competitive. Passing HP HP0-Y39 exam certification can effectively help you entrench yourself and enhance your status in this competitive IT area. In our IT-Tests.com you can get the related HP HP0-Y39 exam certification training tools. Our IT-Tests.com IT experts team will timely provide you the accurate and detailed training materials about HP certification HP0-Y39 exam. Through the learning materials and exam practice questions and answers provided by IT-Tests, we can ensure you have a successful challenge when you are the first time to participate in the HP certification HP0-Y39 exam. Above all, using IT-Tests.com you do not spend a lot of time and effort to prepare for the exam.

If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. IT-Tests.com site has always been committed to provide candidates with a real HP HP0-Y39 certification exam training materials. The IT-Tests.com HP HP0-Y39 Certification Exam software are authorized products by vendors, it is wide coverage, and can save you a lot of time and effort.

Exam Code: HP0-Y39
Exam Name: HP Managing & Troubleshooting Enterprise Wireless Networks HP0-Y39
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-25

HP0-Y39 (Managing & Troubleshooting Enterprise Wireless Networks) Free Demo Download: http://www.it-tests.com/HP0-Y39.html

NO.1 What is a potential risk of enabling the RSSI-based classification feature in an Authorized WLAN
policy?
A. RF Manager must rely exclusively on RSSI to detect the locations of harmful devices, instead of
drawing on the findings of network detectors. This might make the prediction less accurate.
B. Sensors might decide that they should not take action against a potentially harmful device because its
RSSI is low and the device might still be a risk.
C. RF Manager might classify your own access points (APs) as Rogue APs because their transmit power
is too high and take action against them.
D. RF Manager might classify legitimate access points (APs) owned by nearby companies as Rogue APs
and take action against them.
Answer: D

HP   HP0-Y39 exam simulations   HP0-Y39   HP0-Y39 answers real questions   HP0-Y39   HP0-Y39

NO.2 Click the Exhibit button and view both exhibits.
A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are
installed to provide access to the school's video servers. Students running 802.11n clients are not seeing
optimal bandwidth connection data rates. Based on the exhibits, what is a solution to optimize 802.11n
data rates?
A. Disable High Throughput (HT mode) on all radios.
B. Disable RTS/CTS capability on non-802.11n client NICs.
C. Configure Band Steering mode on radio 1 on all APs and radio 2 on AP3 and AP5.
D. Configure Greenfield mode on radio1 on all APs and radio 2 on AP3 and AP5.
Answer: D

HP pdf   HP0-Y39   HP0-Y39 test

NO.3 You set your country of operation and then apply the default Sensor Configuration Template settings to
all sensors in RF Manager. How do your sensors handle channels that cannot be used legally in your
country?
A. The sensors scan these channels and detect threats, but they do not take action against the threats.
B. The sensors scan these channels, detect threats, and take the action you have specified against any
detected threats.
C. The sensors scan these channels and prevent any authorized access points or clients from operating
on these channels.
D. The sensors do not scan these channels for threats.
Answer: A

HP   HP0-Y39   HP0-Y39 exam simulations

NO.4 Click the Exhibit button and view the three exhibits.
RF Manager and its sensors have detected an association between an Uncategorized Client and an
access point (AP) that uses these settings:
SSID = Company C
Security = WPA2 with CCMP and 802.1X
The AP is detected while passing the client traffic on VLAN 20 (10.1.20.0/24). WiFi is permitted at this
location. The exhibits show the Authorized SSID Template, other Authorized WLAN Policy settings, and
the Intrusion Prevention Policy for the location.
What does RF Manager have its sensors do?
A. quarantine the AP only
B. quarantine the client only
C. take no action against either device
D. quarantine both the AP and the client
Answer: A

HP   HP0-Y39 test answers   HP0-Y39 answers real questions   HP0-Y39   HP0-Y39

NO.5 Click the Exhibit button and view both exhibits.
A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are
installed to provide access to the school's video servers. All clients show maximum signal strength, but
some students are experiencing frequent interruptions of video playback. Based on the exhibits, what is a
solution to optimize network throughput for all students.?
A. setting maximum power on radio 1 on all APs
B. setting mandatory data rates for 802.11a to 12
C. changing the channel on radio 2 of AP5 to channel 6
D. lowering the RTS threshold on all radios
Answer: C

HP test answers   HP0-Y39 study guide   HP0-Y39 test   HP0-Y39 exam dumps   HP0-Y39

NO.6 In sensor only (SO) mode, what does an HP sensor monitor?
A. It monitors only one untagged VLAN as well as wireless signals.
B. It monitors wireless signals, but does not monitor VLANs.
C. It monitors multiple VLANs as well as wireless signals.
D. It monitors multiple VLANs, but does not monitor wireless signals.
Answer: A

HP   HP0-Y39   HP0-Y39 questions   HP0-Y39 original questions   HP0-Y39 test

NO.7 Click the Exhibit button and view both exhibits.
A university media course uses an auditorium that seats 400 students. Wireless access points (APs) are
installed to provide access to the school's video servers. Some students are experiencing frequent
interruptions to video playback while others have no issues. Based on the exhibits, what is a solution to
optimize performance for all students?
A. Set all radios to maximum power.
B. Set all APs to the same channel.
C. Enable load balancing of clients across APs.
D. Increase the beacon interval.
Answer: C

HP   HP0-Y39   HP0-Y39

NO.8 Which action does RF Manager take to quarantine a client?
A. It instructs the client's access point to place the client's traffic in a quarantine VLAN.
B. It instructs a sensor to send a forced disassociation message to the client's access point (AP) so that
the AP forces the client to disconnect.
C. It instructs a sensor to send frames to interfere with the frames sent by the quarantined client.
D. It adds the client's MAC address to the access point's MAC lockout list, thereby blocking the client's
traffic.
Answer: C

HP exam simulations   HP0-Y39   HP0-Y39   HP0-Y39

NO.9 A customer reports the performance of their HP A-WA2620E access point (AP) is inadequate. While
investigating the report, you determine that the AP is functioning in MIMO 3x2 mode instead of MIMO 3x3
as desired. What is one possible cause of this problem?
A. The AP is powered using 802.3af PoE.
B. The AP is configured to use a 40Mhz channel bandwidth.
C. The AP is not implementing the local switching feature.
D. The AP is powered using 802.3at PoE.
Answer: A

HP   HP0-Y39 test   HP0-Y39 original questions   HP0-Y39 original questions   HP0-Y39

NO.10 What is the risk of applying intrusion prevention to an access point (AP) listed as Indeterminate?
A. RF Manager cannot determine whether the AP follows your Authorized WLAN policy. You might
quarantine your own AP, which could frustrate users.
B. RF Manager has classified the AP as Indeterminate because you authorized it manually, but it does not
follow your Authorized WLAN policy.
Quarantining your own AP could frustrate users.
C. RF Manager has classified the AP as Indeterminate because its signal is so low. Sensors will make
themselves busy in quarantining an AP that is probably too far away to be a risk.
D. RF Manager cannot determine whether the AP is connected to your system. You might quarantine
another company's AP, which is illegal.
Answer: D

HP test questions   HP0-Y39 certification training   HP0-Y39 test   HP0-Y39

NO.11 By default, which roles do the RF Manager and its sensors perform in detecting Rogue access points
(APs)?
A. Sensors monitor wireless transmissions and RF Manager monitors wired transmissions. They combine
the data to find APs that use your SSIDs but are not on your network.
B. Sensors monitor wireless transmissions and RF Manager monitors wired transmissions. They combine
the data to find unauthorized APs on your network.
C. Sensors monitor wired and wireless transmissions so RF Manager can find unauthorized APs
connected to your wired network.
D. Sensors detect APs that use your SSIDs but are not on your Authorized AP list.
Answer: C

HP   HP0-Y39 test   HP0-Y39 study guide

NO.12 What are the requirements for deploying a sensor that is discovered by RF Manager with zero
configuration? (Select two.)
A. The sensor must operate in network detector (ND) mode.
B. The sensor must be installed on the same VLAN as RF Manager.
C. The network must be set up to assign the sensor IP settings through DHCP.
D. The DNS server must map the WiFi-security-server to the RF Manager IP address.
E. RF Manager and the sensor must both be at their default IP settings.
Answer: C,D

HP certification training   HP0-Y39 answers real questions   HP0-Y39 dumps

NO.13 RF Manager has determined that a Rogue access point (AP) must be quarantined. The only sensor
within range is listed as busy. What happens?
A. RF Manager reclassifies the new Rogue AP as banned so that it cannot connect on the wired side.
B. RF Manager specifies that a quarantine is pending for the new Rogue AP until the sensor is no longer
busy.
C. The sensor stops quarantining one of the currently quarantined devices and starts quarantining the
new Rogue AP.
D. The sensor splits its time between blocking the currently quarantined devices and the new Rogue AP.
Answer: B

HP   HP0-Y39   HP0-Y39 study guide   HP0-Y39

NO.14 Click the Exhibit button.
A customer is experiencing network performance issues with their wireless network. The customer
decides to take corrective actions on their wireless active controller. Based on the exhibit, what will
happen on the wireless network if the customer sent a 1200 byte packet from a wireless client associated
to essid HP_Openaccess? (Select two.)
A. The wireless packet will be fragmented.
B. The wireless packet will trigger RTS/CTS frames to be sent.
C. The wireless packet will not be fragmented.
D. The wireless packet will not trigger RTS/CTS frames to be sent.
E. The access point will send more Beacon frames than if the default configuration had been left
unchanged.
Answer: A,B

HP exam   HP0-Y39 certification training   HP0-Y39 pdf   HP0-Y39 test answers

NO.15 Click the Exhibit button and view both exhibits.
A university media course uses an auditorium that seats 400 students. Students are experiencing slow
network performance, and some clients are having difficulty connecting to the wireless network. The IT
staff installed wireless access points (APs) over a year ago. Previous classes, consisting of 200 students
had no problems. Based on the exhibits, what is a solution to optimize performance for all students?
A. Enable radio 1 on all APs.
B. Add service-template1 to all 2.4Ghz radios.
C. Remove service-template1 from all 5Ghz radios.
D. Set cipher-suite to ccmp for service-template1.
Answer: A

HP test answers   HP0-Y39   HP0-Y39 exam dumps

More and more people choose HP HP0-Y39 exam. Because of its popularity, you can use the IT-Tests.com HP HP0-Y39 exam questions and answers to pass the exam. This will bring you great convenience and comfort. This is a practice test website. It is available on the Internet with the exam questions and answers, as we all know, IT-Tests.com is the professional website which provide HP HP0-Y39 exam questions and answers.