専門的に言えば、試験を受けるに関するテクニックを勉強する必要があります。JPexamというサイトは素晴らしいソースサイトで、SAPのC-TSCM42-64の試験材料、研究材料、技術材料や詳しい解答に含まれています。問題集が提供したサイトは近年で急速に増加しています。あなたは試験の準備をするときに見当もつかないかもしれません。JPexamのSAPのC-TSCM42-64試験トレーニング資料は専門家と受験生の皆様に証明された有効なトレーニング資料で、あなたが試験の合格することを助けられます。
IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにSAPのC-TSCM42-64認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。JPexamのSAPのC-TSCM42-64試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。
JPexamに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JPexamは最新かつ最も正確な試験C-TSCM42-64問題集を用意しておきます。JPexamは皆さんの成功のために存在しているものですから、JPexamを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JPexamはあなたの唯一の選択です。
試験番号：C-TSCM42-64問題集試験科目：SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4
最近更新時間：2014-06-02
問題と解答：全80問 C-TSCM42-64 資格認定
100％の返金保証。1年間の無料アップデート。
>>詳しい紹介はこちら
JPexamを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。JPexamはSAP C-TSCM42-64認証試験を助けって通じての最良の選択で、１００％のSAP C-TSCM42-64認証試験合格率のはJPexam最高の保証でございます。君が選んだのはJPexam、成功を選択したのに等しいです。
今の競争の激しいIT業界ではSAPのC-TSCM42-64試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。
現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、C-TSCM42-64試験はSAPの一つ重要な認証試験で、多くの人がSAP認証されたくて試験に合格しなければなりません。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/C-TSCM42-64_exam.html
NO.1 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAPテスト C-TSCM42-64フリーク C-TSCM42-64特典 C-TSCM42-64体験 C-TSCM42-64取得
NO.2 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP練習 C-TSCM42-64一発合格 C-TSCM42-64教本 C-TSCM42-64問題集
NO.3 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP入門 C-TSCM42-64内容 C-TSCM42-64過去 C-TSCM42-64虎の巻
NO.4 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP PDF C-TSCM42-64 C-TSCM42-64 C-TSCM42-64
NO.5 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP認証試験 C-TSCM42-64認定 C-TSCM42-64内容 C-TSCM42-64 C-TSCM42-64講座
NO.6 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP体験 C-TSCM42-64赤本 C-TSCM42-64費用
NO.7 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAPふりーく C-TSCM42-64通信 C-TSCM42-64認定 C-TSCM42-64教育
NO.8 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP関節 C-TSCM42-64特典 C-TSCM42-64日記
没有评论:
发表评论