あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、MSC-131認定試験を受験して認証資格を取るのは一つの良い方法です。Motorola Solutionsの認定試験のMSC-131資格は非常に大切なものですから、Motorola Solutionsの試験を受ける人もますます多くなっています。
IT業種が新しい業種で、経済発展を促進するチェーンですから、極めて重要な存在ということを我々は良く知っています。IT認証はIT業種での競争な手段の一つです。認証に受かったらあなたは各方面でよく向上させます。でも、受かることが難しいですから、トレーニングツールを利用するのを勧めます。トレーニング資料を選びたいのなら、JPexamのMotorola SolutionsのMSC-131試験トレーニング資料は最高の選択です。この資料の成功率が１００パーセントに達して、あなたが試験に合格することを保証します。
もし弊社のMotorola SolutionsのMSC-131認証試験について問題集に興味があったら、購入するまえにインターネットで弊社が提供した無料な部分問題集をダウンロードして、君の試験に役に立つかどうかのを自分が判断してください。それにJPexamは一年の無料な更新のサービスを提供いたします。
MSC-131認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまMSC-131試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいMSC-131試験に関連する参考書が登場しますよ。それはJPexamのMSC-131問題集です。気楽に試験に合格したければ、はやく試しに来てください。
試験番号：MSC-131問題集
試験科目：Design and Deploy AirDefense Solutions
最近更新時間：2014-01-14
問題と解答：全103問
100％の返金保証。1年間の無料アップデート。
我々は受験生の皆様により高いスピードを持っているかつ効率的なサービスを提供することにずっと力を尽くしていますから、あなたが貴重な時間を節約することに助けを差し上げます。JPexam Motorola SolutionsのMSC-131試験問題集はあなたに問題と解答に含まれている大量なテストガイドを提供しています。インターネットで時勢に遅れないMSC-131勉強資料を提供するというサイトがあるかもしれませんが、JPexamはあなたに高品質かつ最新のMotorola SolutionsのMSC-131トレーニング資料を提供するユニークなサイトです。JPexamの勉強資料とMotorola SolutionsのMSC-131に関する指導を従えば、初めてMotorola SolutionsのMSC-131認定試験を受けるあなたでも一回で試験に合格することができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MSC-131_exam.html
NO.1 Which of the following best defines a "security risk"?
A. The likelihood of being targeted by a given attack, of an attack being successful, and general exposure
to a given threat.
B. The source and means of a particular type of attack.
C. The security flaws in a system that allow an attack to be successful.
D. Reduced Instruction Set Kernel.
Answer: A
Motorola Solutions MSC-131 MSC-131過去問
NO.2 You have configured your ADSP appliance to use a RADIUS server to validate user credentials upon
GUI logon. However, users continue to be validated directly by ADSP. What additional step must be taken
to ensure GUI users are authenticated via the RADIUS server you configured when they are logging into
ADSP?
A. The ADSP appliance must be rebooted to ensure the settings are recorded properly
B. Each user account must be configured to use the correct RADIUS server for authentication
C. You must log into the CLI using the SMXMGR account and run the Enforce Credentials command
D. Log into the GUI with your admin account and click on the Synchronize RADIUS Accounts button in
Appliance Manager
Answer: B
Motorola Solutions MSC-131 MSC-131認証試験
NO.3 Your company processes and stores credit card information in a corporate database. You must be able
to determine the status of the company's compliance to the Payment Card Industry (PCI) standard with
regard to wireless device use. How can this be accomplished using ADSP?
A. By running a PCI compliance report at each of the retail store levels of your ADSP tree.
B. By running a PCI compliance report at the accounting department level of your ADSP tree,
C. By running a PCI compliance report at the system level of your ADSP tree.
D. By running a PCI compliance report at network operations center level of your ADSP tree.
Answer: C
Motorola Solutions参考書 MSC-131 MSC-131問題集 MSC-131参考書
NO.4 How can the Wireless Intrusion Protection System (WIPS) feature of the Motorola Solutions
AirDefense Services Platform (ADSP) be used to protect your Wi-Fi network?
A. The WIPS system can remove rogue access points from neighboring networks
B. The WIPS system can utilize RF Jamming to keep your channels clear.
C. The WIPS system can identify wired leakage and other network vulnerabilities
D. The WIPS system can stop neighboring devices from using your channels
Answer: C
Motorola Solutions認定試験 MSC-131 MSC-131認証試験 MSC-131練習問題 MSC-131認定試験
NO.5 Spectrum Analysis can be performed using different modes of operation. Which of following modes
would be the most appropriate to use if you need to perform a Spectrum Analysis and capture information
about the data link layer (Layer 2 of OSI model)?
A. Dual Layer Scan Mode
B. Continuous Scan Mode
C. Background Scan Mode
D. Interference Scan Mode
Answer: C
Motorola Solutions過去問 MSC-131認定資格 MSC-131 MSC-131
NO.6 You used the Report Builder to create a custom template to support your PCI compliance initiative.
Two weeks later you decide to use the report but you're not quite sure where to locate it. How would you
access this template?
A. By selecting it in the Custom Reports found in the reporting feature
B. By using the search feature in the Web reporting interface
C. By selecting it under the Inactive category on the Reports page
D. By using the Templates drop down box in the Report Builder application
Answer: A
Motorola Solutions MSC-131練習問題 MSC-131
NO.7 What security exists for the communication between sensors and the ADSP appliance?
A. EAP-TTLS and SSL
B. PEAP and SSL
C. PKI and SSL
D. EAP-TLS and SSL
Answer: C
Motorola Solutions認証試験 MSC-131 MSC-131 MSC-131認定証 MSC-131
NO.8 You are the administrator of a very large ADSP installation protecting an international WLAN
deployment. Running a compliance report each day for your boss takes a great deal of your time in the
mornings. What can you do using ADSP to reduce the amount of your time it takes to render this
information and deliver it to your boss?
A. Create a Guest account for your boss. Teach them to run their own each day, leaving you free for other
tasks.
B. Create an Admin account for your boss. Teach them to run their own each day, leaving you free for
other tasks.
C. Add the desired report to the Data Collection Polling interval with a daily schedule to be emailed to your
boss.
D. Add the report to your favorites list. Then schedule it to run at an off peak time and to automatically be
emailed to your boss each day.
Answer: D
Motorola Solutions MSC-131 MSC-131認定試験 MSC-131 MSC-131参考書
NO.9 When would the configuration of ADSP include the use of a RADIUS server?
A. When LDAP is not available
B. When sensor validation is required
C. When sensors require a VPN connection
D. When centralized authentication is required
Answer: D
Motorola Solutions認定資格 MSC-131認定試験 MSC-131 MSC-131
NO.10 A new coffee shop opens in your building offering hot-spot internet access. Several of your users are
connecting to the hot-spot while at their desks to bypass your firewall rules. What is the best thing that can
be done using the ADSP system to prevent this?
A. Integrate with the firewall using SNMP and import the same firewall rules.
B. Create a termination policy to prevent accidental associations of authorized AP's.
C. Create a termination policy to prevent authorized stations from using ad-hoc networks.
D. Create a termination policy to prevent accidental associations of your work stations to unauthorized
networks.
Answer: D
Motorola Solutions練習問題 MSC-131参考書 MSC-131練習問題
NO.11 A requirement for seamless roaming in a Robust Security network is that the access points receive the
Pairwise Master Key (PMK) identifier from the station in the reassociation frame. What other information
must be included in that frame?
A. Any 802.1g VLAN tags.
B. The IP address and subnet mask.
C. The randomly generated shared secret.
D. The MAC address of the old access point.
Answer: D
Motorola Solutions MSC-131参考書 MSC-131 MSC-131過去問 MSC-131
NO.12 Which of the following appropriately characterizes a rogue access point (AP)?
A. An AP that is causing Co-Channel interference with your APs.
B. An AP that is not the same brand as your customers APs.
C. An AP that is on your wired network without proper authorization.
D. An AP that is not using the security required by corporate policy.
Answer: C
Motorola Solutions MSC-131 MSC-131 MSC-131認証試験
NO.13 Broadcasting the SSID and allowing the access point to respond to clients with no SSID makes it easier
for the clients, but some consider it a security loophole. The theory for disallowing these two practices is
that it helps ° h i d ¡± t h e n e t w ork
What is the problem with this theory?
A. Hiding the SSID turns off the beacons thus disabling passive scanning
B. Not responding to null SSIDs causes the EAP process to break down
C. These values must be present in order for intrusion detection systems to function
D. The SSID will still be present in probe request frames and can be seen with a protocol analyzer
Answer: D
Motorola Solutions MSC-131参考書 MSC-131認定資格 MSC-131認定証
NO.14 What is the purpose of the Bonding command in the ADSP CLI.?
A. The Bonding command is used to link sensors to the correct container in the ADSP tree.
B. The Bonding command is used to enable the Primary and Secondary ADSP appliances to synchronize.
C. The Bonding command is used to enable both of the NIC's on ADSP's system board to act as one for
high availability.
D. The Bonding command is used to ensure that both the Primary and Secondary ADSP appliances are
configured to use the same IP address.
Answer: C
Motorola Solutions MSC-131 MSC-131 MSC-131 MSC-131 MSC-131
NO.15 There was a rogue AP on your network as detected by ADSP. The rogue was displayed in your Alarms.
When you run a wireless security posture details report for the same time range, the rogue does not
appear in the report. What is the most likely cause for the rogue not being in the report?
A. The report was run for a different scope than the one that detected the rogue.
B. Your account was not created in the scope level where the rogue was detected.
C. You are logged into ADSP as a guest account which lacks the permission to run the report.
D. The rogue device has been removed from the network and the corresponding alarm is now inactive.
Answer: A
Motorola Solutions MSC-131 MSC-131認定資格
JPexamは最新の000-657問題集と高品質のIIA-CCSA問題と回答を提供します。JPexamのHP2-B102 VCEテストエンジンとCD0-001試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-467 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论