何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。ISQIのCTAL-TM_Syll2012試験に合格したら、あなたは夢を実現することができます。JPexamはあなたの最高のトレーニング資料を提供して、１００パーセントの合格率を保証します。これは本当のことです。疑いなくすぐJPexamのISQIのCTAL-TM_Syll2012試験トレーニング資料を購入しましょう。
JPexam はプロなウェブサイトで、受験生の皆さんに質の高いサービスを提供します。プリセールス.サービスとアフターサービスに含まれているのです。JPexamのISQIのCTAL-TM_Syll2012試験トレーニング資料を必要としたら、まず我々の無料な試用版の問題と解答を使ってみることができます。そうしたら、この資料があなたに適用するかどうかを確かめてから購入することができます。JPexamのISQIのCTAL-TM_Syll2012試験トレーニング資料を利用してから失敗になりましたら、当社は全額で返金します。それに、一年間の無料更新サービスを提供することができます。
JPexamのCTAL-TM_Syll2012問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、JPexamは全額で返金することができます。あるいは、無料で試験CTAL-TM_Syll2012問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。
試験番号：CTAL-TM_Syll2012問題集
試験科目：ISTQB Certified Tester Advanced Level - Test Manager [Syllabus 2012]
最近更新時間：2013-12-29
問題と解答：全64問
100％の返金保証。1年間の無料アップデート。
JPexamが提供したISQIのCTAL-TM_Syll2012トレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、ISQIのCTAL-TM_Syll2012試験はとても人気がある認定試験です。JPexamが提供したISQIのCTAL-TM_Syll2012トレーニング資料を手にすると、夢への扉はあなたのために開きます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/CTAL-TM_Syll2012_exam.html
NO.1 Which of the following is an example of the test closure activity indicated as "lessons learned"?
K2 1 credit
A. Archive all the test results of the acceptance testing phase
B. Deliver a list of the open defects of a software product released into production to the service
desk team
C. Participate in a meeting at the end of a project aimed at better managing the events and
problems of future projects
D. Deliver an automated regression test suite, used during the system test phase of a software
product released into production, to the team responsible for maintenance testing
Answer: C
ISQI認定試験 CTAL-TM_Syll2012 CTAL-TM_Syll2012認定証 CTAL-TM_Syll2012認定資格
NO.2 The following are the exit criteria described in the test plan of a software product:
EX1. The test suite for the product must ensure that at least each quality risk item is covered by at
least one test case (a quality risk item can be covered by more test cases).
EX2. All test cases in the test suite must be run during the execution phase.
EX3. Defects are classified into two categories: "C" (critical defect) and "NC" (non-critical defect). No
known C defects shall exist in the product at the end of the test execution phase.
Which of the following information is useless when the specified exit criteria is evaluated?
K2 1 credit
A. A traceability matrix showing the relationships between the product risk items and the test cases
B. A list of all the open defects with the associated classification information extracted from the
defect tracking system
C. A chart, showing the trend in the lag time from defect reporting to resolution, extracted from the
defect tracking system
D. The execution status of all the test cases extracted from the test management tool
Answer: C
ISQI CTAL-TM_Syll2012練習問題 CTAL-TM_Syll2012 CTAL-TM_Syll2012練習問題 CTAL-TM_Syll2012 CTAL-TM_Syll2012
NO.3 You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special packages
in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the
system testinG.
EXCR1- Each "critical" quality risk item must be covered by at least one test condition
EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and
no more bottles than the package size. No error messages shall be displayed if the user selects a
valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card
data are given by the user
The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to
get the number of bottles from the user Test analysis for system testing has just begun and the
following test conditions have been identified.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles
from the user
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?
K3 2 credits
A. 4
B. 3
C. 2
D. 1
Answer: A
ISQI認定資格 CTAL-TM_Syll2012 CTAL-TM_Syll2012認定試験
NO.4 The following are the requirements identified as "critical":
REQ-SEL-001. The user shall be able to combine all the three products with all the four durations to
define an item to purchase
REQ-SEL-002. The user shall be able to add a maximum of six different items to the shopping cart
REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using a credit
voucher
REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using the
available credit already charged on the smartcard
REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using all the
accepted credit cards (Visa, MasterCard and Great Wall Card)
REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both the
"select" and "purchase" pages going back to the "browse" page (anonymous navigation)
Moreover the following quality risk item has been identified as "critical":
QR-P1. The web customer portal might not be able to provide the expected response time (less than
10 sec) for the purchase transactions under a load of up-to 1000 concurrent users
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-01. Test the combinations of products and durations to define an item to purchase
TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart
TC-PUR-01. Test the purchase of an item
TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard
What is the MINIMUM number of test conditions that must be added to fulfill both the EXCR1 and
EXCR2 exit criteria?
K3 2 credits
A. 1
B. 2
C. 3
D. 4
Answer: C
ISQI CTAL-TM_Syll2012 CTAL-TM_Syll2012 CTAL-TM_Syll2012
NO.5 Which of the following statements describing the consequences of specifying test conditions
at a detailed level is NOT true?
K2 1 credit
A. In an environment where the test basis is continuously changing, it is recommended to specify
test conditions at a detailed level in order to achieve a better maintainability
B. The specification of test conditions at a detailed level can be effective when no formal
requirements or other development work products are available
C. The specification of test conditions at a detailed level can require the implementation of an
adequate level of formality across the team
D. For system testing, the specification of test conditions at a detailed level, carried out early in the
project as soon as the test basis is established, can contribute to defect prevention
Answer: A
ISQI CTAL-TM_Syll2012 CTAL-TM_Syll2012 CTAL-TM_Syll2012認定試験
NO.6 You are the Test Manager for a project to develop a client-server application that allows wine
vendors to order custom-assorted packages of wines of several winemakers to sell special packages
in their wine shops.
You decide to apply a blended risk-based and reactive testing strategy. Below the exit criteria for the
system testinG. EXCR1- Each "critical" quality risk item must be covered by at least one test
condition EXCR2- Each "critical" requirement must be covered by at least one test condition
The following are the "critical" requirements of the application:
REQ-SEL-1. The application shall allow the user to order only one package at a time
REQ-SEL-2. The application shall allow the user to select between four different packages (2bottles,
6-bottles, 12-bottles, 15-bottles)
REQ-SEL-3. The application shall allow the user to order a package containing at least 1 bottle and
no more bottles than the package size. No error messages shall be displayed if the user selects a
valid number of bottles (at least 1 bottle and no more than the package size)
REQ-SEL-4. The application shall display an error message "Invalid number of bottles" if an invalid
number of bottles is selected by the user (zero bottles or a number higher than the package size)
REQ-PAY-1. The application shall allow the user to pay with the three accepted credit cards (Visa,
MasterCard, American Express)
REQ-PAY-2. The application shall display an error message "Invalid credit card" if invalid credit card
data are given by the user
QUSTION NO: 11 The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed
to get the number of bottles from the user
Test analysis for system testing has just begun and the following test conditions have been identifieD.
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order TC-CR-RSK-1. Test the accepted values from
the input field designed to get the number of bottles from the user
Assume that you have used traceability to determine the logical test cases that cover all the
requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the
REQSEL-4 requirement?
K3 2 credits
A. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are
displayed
B. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
C. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles"
message is displayed
D. Select a 6-bottles package, then try to insert 7 bottles
Answer: C
ISQI CTAL-TM_Syll2012認定資格 CTAL-TM_Syll2012 CTAL-TM_Syll2012認証試験
NO.7 Consider an information system of a Pay-Tv company based on a SOA architecture.
The integrated system currently consists of three core systems:
-a CRM (Customer Relationship Management) system
-a BRM (Billing and Revenue Management) system
-a CAS (Conditional Access System) system all of them communicating with SOA Middleware.
You have been asked to manage the testing activities for the integration of two additional
off-theshelf systems from two different vendors: a SMS (Short Message Service) server and an IVR
(Interactive Voice Response) system.
Assume that there is a high likelihood that the two off-the-shelf systems will be low-quality and that
you have a clear proof that the testing performed by the two vendors on their systems has been
unsystematic and unprofessional. This obviously leads to higher quality risk for the overall
integrated system.
You are the Test Manager of this project. Your main goal is to plan for testing activities to mitigate
this risk.
Which of the following answers best describes the test activities (assuming it is possible to perform
all of them) you should plan for?
K4 3 credits
A. You should plan for an informal and minimal acceptance test of the two off-the-shelf systems and
then a single end-to-end test of the overall integrated system
B. You should directly plan for a single end-to-end test focused on end-to-end tests of the overall
integrated system without an acceptance test of the two off-the-shelf systems
C. You should plan for two levels: a system integration test and an end-to-end test of the overall
integrated system
D. You should plan for adequate re-testing of both the systems followed by a system integration test
and an end-to-end test of the overall integrated system
Answer: D
ISQI CTAL-TM_Syll2012認定資格 CTAL-TM_Syll2012 CTAL-TM_Syll2012認定試験
NO.8 Assume you are the Test Manager for a new software release of an e-commerce application.
The server farm consists of six servers providing different capabilities. Each capability is provided
through a set of web services.
The requirements specification document contains several SLAs
(Service Level Agreements) like the following:
SLA-001: 99.5 percent of all transactions shall have a response time less than five seconds under a
load of up-to 5000 concurrent users
The main objective is to assure that all the SLAs specified in the requirements specification
document will be met before system release. You decide to apply a risk-based testing strategy and
an early risk analysis confirms that performance is high risk. You can count on a well-written
requirements specification and on a model of the system behavior under various load levels
produced by the system architect.
Which of the following test activities would you expect to be the less important ones to achieve the
test objectives in this scenario?
K4 3 credits
A. Perform unit performance testing for each single web service
B. Monitor the SLAs after the system has been released into the production environment
C. Perform system performance testing, consisting of several performance testing sessions, to verify
if all the SLAs have been met
D. Perform static performance testing by reviewing the architectural model of the system under
various load levels
Answer: B
ISQI練習問題 CTAL-TM_Syll2012問題集 CTAL-TM_Syll2012認定試験 CTAL-TM_Syll2012 CTAL-TM_Syll2012参考書
JPexamは最新のJN0-690問題集と高品質の000-614問題と回答を提供します。JPexamの70-688 VCEテストエンジンと3103試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のECP-102 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论