About the JN0-343 exam certification, reliability can not be ignored. JN0-343 exam training materials of IT-Tests.com are specially designed. It can maximize the efficiency of your work. We are the best worldwide materials provider about this exam.
Now there are many IT professionals in the world and the competition of IT industry is very fierce. So many IT professionals will choose to participate in the IT certification exam to improve their position in the IT industry. JN0-343 exam is a very important Juniper's certification exam. But if you want to get a Juniper certification, you must pass the exam.
If you feel that you purchase IT-Tests.com Juniper JN0-343 exam training materials, and use it to prepare for the exam is an adventure, then the whole of life is an adventure. Gone the furthest person is who are willing to do it and willing to take risks. Not to mention that IT-Tests.com Juniper JN0-343 exam training materials are many candidates proved in practice. It brings the success of each candidate is also real and effective. Dreams and hopes are important, but more important is to go to practice and prove. The IT-Tests.com Juniper JN0-343 exam training materials will be successful, select it, you have no reason unsuccessful !
Exam Code: JN0-343
Exam Name: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
If you choose to buy the IT-Tests's raining plan, we can make ensure you to 100% pass your first time to attend Juniper certification JN0-343 exam. If you fail the exam, we will give a full refund to you.
JN0-343 (Juniper Networks Certified Internet Specialist (JNCIS-ENT)) Free Demo Download: http://www.it-tests.com/JN0-343.html
NO.1 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper exam JN0-343 JN0-343 JN0-343
NO.2 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 answers real questions JN0-343 JN0-343
NO.3 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper certification JN0-343 JN0-343 JN0-343 study guide
NO.4 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper JN0-343 exam dumps JN0-343 exam prep JN0-343 JN0-343 certification training JN0-343
NO.5 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper JN0-343 exam prep JN0-343 original questions
NO.6 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343 questions
NO.7 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper answers real questions JN0-343 JN0-343 JN0-343 JN0-343 questions JN0-343 exam
NO.8 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper test questions JN0-343 study guide JN0-343 exam simulations JN0-343
NO.9 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper test JN0-343 answers real questions JN0-343 JN0-343 JN0-343
NO.10 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343 certification JN0-343 exam JN0-343 braindump
NO.11 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343 exam prep JN0-343 JN0-343 JN0-343 JN0-343 original questions
NO.12 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper braindump JN0-343 practice test JN0-343 JN0-343 original questions
NO.13 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper JN0-343 dumps JN0-343 exam JN0-343 exam dumps
NO.14 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper JN0-343 JN0-343
NO.15 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper JN0-343 pdf JN0-343 JN0-343
NO.16 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper JN0-343 study guide JN0-343 JN0-343
NO.17 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper JN0-343 questions JN0-343 JN0-343 demo JN0-343
NO.18 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper JN0-343 pdf JN0-343 JN0-343 JN0-343 braindump
NO.19 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
Juniper certification JN0-343 test answers JN0-343 JN0-343 JN0-343 answers real questions
NO.20 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 dumps JN0-343
NO.21 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper test answers JN0-343 study guide JN0-343 exam dumps JN0-343 exam
NO.22 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper test answers JN0-343 exam JN0-343 JN0-343 test answers
NO.23 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper braindump JN0-343 JN0-343 demo JN0-343
NO.24 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 exam dumps JN0-343 practice test JN0-343 test answers
NO.25 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper original questions JN0-343 JN0-343 dumps JN0-343 test answers JN0-343 JN0-343
NO.26 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper test answers JN0-343 test answers JN0-343 original questions JN0-343 test JN0-343
NO.27 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper practice test JN0-343 practice test JN0-343
NO.28 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper JN0-343 JN0-343 JN0-343 study guide JN0-343 JN0-343 certification
NO.29 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper exam JN0-343 exam JN0-343 exam prep JN0-343 practice test JN0-343 JN0-343 study guide
NO.30 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper certification training JN0-343 questions JN0-343 questions JN0-343 answers real questions JN0-343 JN0-343
To pass the Juniper JN0-343 exam is a dream who are engaged in IT industry. If you want to change the dream into reality, you only need to choose the professional training. IT-Tests.com is a professional website that providing IT certification training materials. Select IT-Tests.com, it will ensure your success. No matter how high your pursuit of the goal, IT-Tests.com will make your dreams become a reality.
没有评论:
发表评论