JPexamはHP0-J12認定試験に対する短期で有効な訓練を提供するウェブサイト、HP0-J12認定試験が生活の変化をもたらすテストでございます。合格書を持ち方が持たない人により高い給料をもうけられます。
HP0-J12認定試験は試験に関連する書物を学ぶだけで合格できるものではないです。がむしゃらに試験に要求された関連知識を積み込むより、価値がある問題を勉強したほうがいいです。効率のあがる試験問題集は受験生の皆さんにとって欠くことができないツールです。ですから、はやくJPexamのHP0-J12問題集を入手しましょう。これは高い的中率を持っている問題集で、ほかのどのような勉強法よりもずっと効果があるのです。これはあなたが一回で楽に成功できるを保証するめぼしい参考書です。
JPexamはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJPexamの問題集を使うので試験に合格しますた。彼らはJPexamの問題集が有効なこと確認しました。JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
いつもあなたに最高のHP0-J12認定試験に関連する試験参考書を与えられるために、JPexamは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、JPexamはあなたの最もよい選択です。長い間にわたって、JPexamは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。JPexamの試験問題集を利用したことがある人がきっといますから。JPexamは最優秀な試験HP0-J12参考書を提供してあなたを試験に合格させることを保証します。
試験番号：HP0-J12問題集
試験科目：Supporting ESL E-Series and EML E-Series Libraries
最近更新時間：2014-03-16
問題と解答：全119問
100％の返金保証。1年間の無料アップデート。
弊社が提供した問題集がほかのインターネットに比べて問題のカーバ範囲がもっと広くて対応性が強い長所があります。JPexamが持つべきなIT問題集を提供するサイトでございます。
弊社は強力な教師チームがあって、彼たちは正確ではやくて例年のHP HP0-J12認定試験の資料を整理して、直ちにもっとも最新の資料を集めて、弊社は全会一緻で認められています。HP HP0-J12試験認証に合格確率はとても小さいですが、JPexamはその合格確率を高めることが信じてくだい。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-J12_exam.html
NO.1 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE
HP HP0-J12認証試験 HP0-J12 HP0-J12参考書
NO.2 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B
HP過去問 HP0-J12認証試験 HP0-J12問題集 HP0-J12 HP0-J12認証試験
NO.3 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A
HP過去問 HP0-J12参考書 HP0-J12 HP0-J12
NO.4 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B
HP HP0-J12 HP0-J12認定試験 HP0-J12 HP0-J12問題集
NO.5 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD
HP HP0-J12 HP0-J12問題集 HP0-J12
NO.6 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D
HP練習問題 HP0-J12 HP0-J12
NO.7 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C
HP参考書 HP0-J12 HP0-J12認定証 HP0-J12
NO.8 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C
HP参考書 HP0-J12 HP0-J12認証試験
NO.9 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C
HP認定資格 HP0-J12練習問題 HP0-J12 HP0-J12 HP0-J12
NO.10 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B
HP HP0-J12参考書 HP0-J12 HP0-J12問題集 HP0-J12問題集
NO.11 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C
HP HP0-J12 HP0-J12 HP0-J12練習問題 HP0-J12認証試験
NO.12 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D
HP認定試験 HP0-J12認定資格 HP0-J12
NO.13 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A
HP練習問題 HP0-J12認定試験 HP0-J12 HP0-J12
NO.14 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D
HP HP0-J12 HP0-J12 HP0-J12問題集
NO.15 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D
HP参考書 HP0-J12練習問題 HP0-J12 HP0-J12参考書 HP0-J12練習問題
NO.16 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D
HP認定資格 HP0-J12参考書 HP0-J12認証試験 HP0-J12
NO.17 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B
HP HP0-J12 HP0-J12 HP0-J12参考書 HP0-J12認定証
NO.18 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C
HP練習問題 HP0-J12 HP0-J12問題集 HP0-J12認証試験
NO.19 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A
HP問題集 HP0-J12練習問題 HP0-J12 HP0-J12問題集 HP0-J12
NO.20 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C
HP HP0-J12 HP0-J12過去問 HP0-J12問題集 HP0-J12
NO.21 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A
HP認定資格 HP0-J12練習問題 HP0-J12
NO.22 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B
HP認証試験 HP0-J12 HP0-J12認定証 HP0-J12認証試験
NO.23 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B
HP認証試験 HP0-J12練習問題 HP0-J12問題集
NO.24 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A
HP HP0-J12 HP0-J12認証試験 HP0-J12
NO.25 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C
HP問題集 HP0-J12 HP0-J12
NO.26 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A
HP認定資格 HP0-J12 HP0-J12認証試験 HP0-J12練習問題
NO.27 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE
HP参考書 HP0-J12認証試験 HP0-J12 HP0-J12
NO.28 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C
HP HP0-J12 HP0-J12 HP0-J12参考書
NO.29 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B
HP練習問題 HP0-J12 HP0-J12練習問題 HP0-J12 HP0-J12
NO.30 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD
HP認定証 HP0-J12練習問題 HP0-J12
JPexamは最新の000-451問題集と高品質の70-688問題と回答を提供します。JPexamの642-980 VCEテストエンジンと000-276試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-480 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论